A smaller project with 98,09 kWP as a combination of EVOlution and Flat Direct for a kindergarten in Bad Kreuznach.
Flat Direct
The mounting system for penetrating-free roof application up to 30° roof inclination.
The Flat Direct captivates by its wide diversified range of applications and offers operational possibilities in a previously undeveloped roof segment. Whether pitched-, pent-, shed-, barrel or butterfly-roof cladded with foil, bitumen or sandwich panels, the Flat Direct is always the best penetrating-free solution for a roof inclination up to 30°.
Profit from:
- Ridge bracket or ridge joint
maximum safety without penetrating the roof - Self-developed software - PMT Plan
for an optimum layout of all roof mounting projects - Maximum customer`s protection by the PMT insurance
10 years insurance cover included in every project
PRODUCT CHARACTERISTICS
Ballast optimized
- Verification by means of WTG wind tunnel statement
- Ballast fixing with universal module clamps
Variable range of application
- Penetrating-free mounting possible
- Pitched-, pent-, shed-, barrel- and butterfly-roofs
- Ridge joint, ridge coupling, ridge coupling with compensating ballast
Module assembly guidelines
- Compliance with module clamping ranges for the best-selling modules
- Clearing of the module drainage holes
- Optional: low-resistance module earthing
Ideal cable routing
- Integrated cable duct cover
Universal module clamp
- Universal module clamp from 30 to 50 mm module frame height
- Removable and reusable
Optimum contact surface
- Continuous ground rail of 80 mm width
- High-Tec protective mat without plasticizer migration
- Roof drainage guaranteed
Extensive range of accessories
- Inverterbank
- Roof fastening points
Roof types
- Pitched-, pent-, shed-, barrel- or butterfly-roof
- 0° to 30°
- Foil, bitumen, concrete, sandwich
- No roof penetration
- Ridge joint or ridge bracket
- Module length + 160mm from module edge to module edge
- Aluminium EN-AW-6063-T3
- Stainless steel A2-70
- From 1,25 kg/m² surface load
- 11 mm thick high-tech protection mat with anti-slip coating
- No plasticiser migration
- 2 lines à 3 modules
- 3 lines à 2 modules
- All common PV module sizes
Width: 980-1020 mm
Length: 1630-1680 mm
Height: 30-50 mm
- » Which are the installation possibilities for the Flat Direct?
-
There are four different installation possibilities for the Flat Direct.
- The first installation possibility for pitched roofs:The ridge coupling. Here, the mounting system on the first roof surface tightens the other mounting system on the opposite roof surface. Penetration of the roof is not necessary. The individual components of the system must be roughly ballasted equal.
- The second installation possibility for pitched roofs: A support with counter ballast. This possibility will be used, when the mounting system is only installed on one roof surface. In this case, the second half of the roof is only equipped partially with ballast and the under-construction.
- The third installation possibility for pitched roofs: The use of the ridge bracket is not possible in case of disturbing centric objects (light arc). Here, some fastening points will be used on which the system is mounted. However, some penetrations of the roof cannot be avoided in order to install the fastening points.
- The fourth installation possibility or pitched roofs: Here the ridge bracket is used as well. However, the ridge bracket is not mounted on the ridge, but over the ridge on the periphery of the building. Thus, a penetration of the roof is also not necessary.
- The first installation possibility for pitched roofs:The ridge coupling. Here, the mounting system on the first roof surface tightens the other mounting system on the opposite roof surface. Penetration of the roof is not necessary. The individual components of the system must be roughly ballasted equal.
Technical Data
Roof types
- Pitched-, pent-, shed-, barrel- or butterfly-roof
- 0° to 30°
- Foil, bitumen, concrete, sandwich
- No roof penetration
- Ridge joint or ridge bracket
- Module length + 160mm from module edge to module edge
- Aluminium EN-AW-6063-T3
- Stainless steel A2-70
- From 1,25 kg/m² surface load
- 11 mm thick high-tech protection mat with anti-slip coating
- No plasticiser migration
- 2 lines à 3 modules
- 3 lines à 2 modules
- All common PV module sizes
Width: 980-1020 mm
Length: 1630-1680 mm
Height: 30-50 mm
Components
Downloads
FAQ
- » Which are the installation possibilities for the Flat Direct?
-
There are four different installation possibilities for the Flat Direct.
- The first installation possibility for pitched roofs:The ridge coupling. Here, the mounting system on the first roof surface tightens the other mounting system on the opposite roof surface. Penetration of the roof is not necessary. The individual components of the system must be roughly ballasted equal.
- The second installation possibility for pitched roofs: A support with counter ballast. This possibility will be used, when the mounting system is only installed on one roof surface. In this case, the second half of the roof is only equipped partially with ballast and the under-construction.
- The third installation possibility for pitched roofs: The use of the ridge bracket is not possible in case of disturbing centric objects (light arc). Here, some fastening points will be used on which the system is mounted. However, some penetrations of the roof cannot be avoided in order to install the fastening points.
- The fourth installation possibility or pitched roofs: Here the ridge bracket is used as well. However, the ridge bracket is not mounted on the ridge, but over the ridge on the periphery of the building. Thus, a penetration of the roof is also not necessary.
- The first installation possibility for pitched roofs:The ridge coupling. Here, the mounting system on the first roof surface tightens the other mounting system on the opposite roof surface. Penetration of the roof is not necessary. The individual components of the system must be roughly ballasted equal.
3D Model
News
Rasch Reinigung
Flat Direct
Our proven pitched roof mounting system Flat Direct with 436 kWp realized for the laundry Rasch-Reinigung in Magdeburg.
Europe Steel
Flat Direct
A steel mill in Moerijk, NL, needed a special sub-construction for 806 kWp, which allows a mounting with little ballast. No question, that our proved Flat Direct came into action.
